Trade Catalogues
Twin Wall System
Jeremias twin-wall is suitable for burning all types of fuel in situations where a chimney system is needed to go either on the outside of a building or to be built inside where there is not an existing chimney stack. Jeremias use a “push-fit” system for their rigid pipe where each component pushes into the following piece and a locking band (provided with all lengths, bends and adaptors) goes around the joint. O-rings are available for condensing purposes.
All of Jeremias products have been HETAS approved and quality tested.
Ultraflex Stainless Steel
Our ULTRAFLEX liners are all of stainless steel twin-lined grade 1 quality and produced to the highest of standards. The liners are designed to withstand high temperatures and has a good resistance to corrosion. We produce different liners; 316L/316L and 904/904, each designed to perform under various circumstances depending on the types of fuel used.
We also stock a wide range of fittings to use in the installation of our liners. All of our flexible liner products are of the highest quality and a variety are available to suit the individual needs of the customer.
Vitreous Enamelled Stove Pipe
Flue Supplies chosen brand of Vitreous Enamelled Flue Pipe is a single wall product manufactured and coated to the highest standards and is suitable for use on gas, oil and multi-fuel appliances, rating upto 50kW output.
A superior grade 1.2mm zero carbon steel is used to manufacture all the components in this range. Following manufacture, components are coated both internally and externally with a ground coat and a top coat of high temperature resistant and acid resistant vitreous enamel coating. Due to the chemical specification of the steel used for this product, it provides an excellent surface for the glass coating to adhere to.
316 1mm
The 316 stainless steel is designed primarily for high temperature applications in the domestic market for gas, oil, solid and multi-fuel installations.
The 316 flue pipe is a range of prefabricated Stainless Steel Single Wall flue and vent systems. The 1mm product have a dull 2B finish. Lengths and fittings have a quick and easy to use socket and spigot jointing system which is leak proof when sealed and installed as recommended. Locking
Twin Wall System - Commercial Sizes
Twin-wall is suitable for burning all types of fuel in situations where a chimney system is needed to go either on the outside of a building or to be built inside where there is not an existing chimney stack.
Jeremias use a “push-fit” system for their rigid pipe where each component pushes into the following piece and a locking band (provided with all lengths, bends and adaptors) goes around the joint. O-rings are available for condensing purposes.
All of Jeremias products have been HETAS approved and quality tested.
316 0.6mm Stainless Steel (Condensing)
The 316 stainless steel is designed primarily for high temperature applications in the domestic market for gas, oil, solid and multi-fuel installations.
The 316 flue pipe is a range of prefabricated Stainless Steel Single Wall flue and vent systems. The 1mm product have a dull 2B finish. Lengths and fittings have a quick and easy to use socket and spigot jointing system which is leak proof when sealed and installed as recommended.